| Technology |
|
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3af Power Over Ethernet (PoE)
IEEE 802.3x Flow Control and Back-pressure
Broadcast storm control
|
|
| Performance |
|
Store and Forward Technology with 2.0Gbps wire-speed non-blocking Switch Fabric |
|
|
|
|
|
|
448kbits Embedded packet buffer |
|
|
14,880pps for Ethernet and 148,810pps for Fast Ethernet |
|
|
|
|
End-Span wiring architecture with AC disconnection behavior
Provides PD classification detection, class ID 0~3 follow IEEE802.3af standard
Pin assignment: V+ (Pin 4, 5), V- (Pin 7, 8), TX (Pin 1, 2), RX (Pin 3, 6) |
|
| Interface |
|
4 x 10/100Base-TX Ports auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection with PoE injector
2 x 10/100Base-TX Ports auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection
|
|
|
10/100TX: Rugged RJ45 with IP67 grade protection
Redundant Power: M12 A-coded male 5 pin connector, Pin assignment (Pin1: V1+, Pin3: V-, Pin4: V2+)
|
|
|
10Base-T: 4-pair UTP/STP Cat. 4, 5 cable,
100Base-TX: 4-pair UTP/STP Cat.5, Cat.5E/Cat.6 cable |
|
|
Power, 10/100M, Link/Acts
Power: Power 1 / Power 2 (Green)
Fast Ethernet: Link (Green) / Activity (Green blinking),
PoE: Power on (Blue) |
|
| Power Requirements |
|
Operating voltage: DC 44~57V
8Watts @ 48V (Maximum) without PD loading |
|
| Mechanical |
|
|
|
|
|
|
|
213.6 mm (H) x 106.0 mm (W) x 56.5 mm (D) |
|
|
|
| Environmental |
|
|
|
-40 to 85°C (-40 to 185°F) |
|
| Regulatory Approvals |
|
|
|
FCC Class A; CE/EN55022:2003 Class A |
|
|
EN61000-4-2:1998,ESD
EN61000-4-3:1998, RS
EN61000-4-4:1995, EFT
EN61000-4-5:1995, Surge
EN61000-4-6:1996, CS
EN61000-4-8:PFM |
|
|
|
|
|
|
|
|
|
